Kuidas Õigesti Juhi Tenon Saw


Kuidas Õigesti Juhi Tenon Saw

Tennise saag on spetsiaalne saagi tüüp, mis muudab tihendid, mis mahuvad teise puutükini, et saavutada tugev ühendus. Need on mõned kõige tugevamad liigendid, kuid need vajavad täpseid kärpeid. Nende kärpimiste jaoks on oluline teada, kuidas korralikult tinaviku näha. See pole liiga keeruline, kuid see nõuab tehnikat juhtimist.


Etapp 1 - plaadid

Enne tennise saagimist on oluline, et lõigatud otsad asetseksid õige 90°. Alusta nende nurkade kontrollimist puusepa ruuduga. Kui nurk ei ole 90 kraadi, peate kasutama niitkarbi ja tugijalga, et seda 90° võrra korrigeerida.

Kontrolli selle pärast mööda tara. Kui näete lünki, peate kasutama lennukit kõikidel külgedel, nii et teil on mõlemal küljel absoluutne 90°. Lihtsalt ära võtta väga väike kogus mõlemal küljel, kuni olete kindel, et kõik küljed on ruudukujulised.

2. samm - tähistamine

Punktidega ruudus peate tegema kümne sügavuse ja laiuse. Alustage puidu sügavuse märgistamisega puidust ja seejärel plaadi otsa lõpu suuruseks, kõik pliiatsiga.

3. samm - lõikamine

Seadke tiibasaaga üles. Kui puit on kindlalt paigas, alustage iga laua otsa otsa lühikest külge. Lõika puidule sügavusjoonele. Saate selle seeläbi seadistada, nii et sul pole õiget sügavust tagama, et oleks vaja mõelda.

Pärast seda peate pikkade külgede lõikama, minema samale sügavusele. Selleks, et küpsetamise tegemine lõpetada, lõigake mööda märgi pikkusest plaati, mis vabastab tiiba. Võimalik, et peate kasutama ketaslõikurit, et tagada, et alaosa on puhas ja 90°. See on hädavajalik, et tagada lohisemine.

4. samm - lihvimine

Peate olema kindel, et küljed, mida olete lihtsalt lõigatud, on siledad, kuna need ei ole pärast lõikamist. Alustage kergelt kõvasti liivapaberiga ja kümme aeglaselt liigutage peenema maitsetaimi. Veenduge, et ka liibitseks aluspõhi, laual.

Sa tahad olla kindlad, et puit on täiesti sile. Kontrollige oma sõrmeotstega, et hinnata puidu sujuvust. Selleks, et täita, katsetage tiibi sobivust sisselõikega. Kui see on liiga pingeline, peate veidi pühkima, nii et see on hea, kuid mitte ületamatu, sobiv. Sellel juhul saab liiva pigem rullima, sest võite puidust vähem maha võtta. Kui olete rahul küpsuse sobivusega, on teie töö valmis.

FAQ - 💬

❓ How do you use a Tenor saw?

👉 1:392:43How to Use a Tenon Saw | WoodworkingStart of suggested clipEnd of suggested clipPlace the blade of the saw on the line draw the blade backwards to make a slit in the timber. YouMorePlace the blade of the saw on the line draw the blade backwards to make a slit in the timber. You can place your thumb beside the blade to guide the saw as you start the groove.

❓ What is a tenon saw good for?

👉 Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. As standard a Tenon saw will have between 10 and 14 teeth per inch (TPI), this allows you to have more control over the depth and direction of the cut you are making.

❓ Who invented the tenon saw?

👉 Tenon saw with a flat metal blade, made by Loxley, around 1830-1860. "Loxley" was a brand name for a range of lesser quality saws made by Sanderson Brothers & Newbould, one of the biggest Sheffield saw firms.

❓ When would you use a tenon saw?

👉 What are Tenon Saws Used for? Tenon saws are mostly used for short, accurate cuts in demanding precision jobs such as joinery or furniture-making. Tenon saws get their name from being commonly used in cutting smaller or more intricate pieces of wood, and especially for making joints.

❓ What is the difference between a dovetail saw and a tenon saw?

👉 A well-sharpened well-set dovetail saw is used as much for other cutting alongside its larger cousin the tenon saw, which also is not a dedicated use saw either. Most tenon saws are sharpened for aggressive rip cut, which is exactly what you need for cutting the cheeks of tenons.

❓ How do you cut straight with a tenon saw?

👉 5:228:15How to Saw Straight with a Handsaw | Paul Sellers

❓ Can a tenon saw cut metal?

👉 A tenon saw is a kind of backsaw that is used to cut straight lines in wood. It does not cut materials such as metal.

❓ What is the best TPI for cutting wood?

👉 TPI is the number of teeth the blade has per inch. If you're looking to cut wood or other soft materials, you'll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable.

❓ Why is it called a tenon saw?

👉 Tenon saw – a midsized backsaw. The saw derives its name from its use in the cutting of tenons for mortise and tenon joinery. Tenon saws are commonly available with rip-filed teeth for rip cutting and cross-cut for cutting across the grain.

❓ Why do tenon saws have a brass back?

👉 Tenon saws are used for accurate, straight cuts in small pieces of wood. The back of the saw limits the depth of the cut. The brass or steel back stiffens the blade and provides sufficient weight to cut. This increases the accuracy of the cut.

❓ What saw does Paul Sellers use?

👉 Paul Sellers recommends a 12” tenon saw with 14-16 PPI. You can get brass-backed or steel-backed ones, the steel-backed saws are slightly lighter in weight so it is down to personal preference, however Paul says most experienced craftsman ultimately use a brass-backed.

Videod Seotud Artiklid: The Mortise And Tenon Cut By Hand And Cut By Machine.